Tips on Running Carbonization Furnace Safely

As Biochar plays more and more important role in human daily life and industrials, the increasing demand for charcoal also attracts many investors who want to process charcoal by charcoalizing equipment, but how to purchase the right charcoalizing equipment? Today, I will briefly introduce Leemay Machinery's carbonization equipment and some tips on how to process the carbonization production safely.

Leemay Machinery Biochar Furnace is equipped with flue gas purification and recovery device, the flue gas recovered during the carbonization process is purified and used for the heating of the furnace itself, and the excess heat can be used for drying and boiler combustion, so that the flue gas produced can be fully utilized. The continuous carbonization process greatly shortens the production cycle and improves the carbonization efficiency, which is the ideal equipment for producing charcoal.

The carbonization furnace turns the biomass material into charcoal under the action of high temperature, and some tips that should be paid attention to during the process:
1. Check the operation of the fan before using the carbonizing kiln to ensure that the fan runs flexibly and stably.
2. Check the condenser and the connection of the parts.
3. Check the quantity of sealing rock wool to ensure sufficient usage.
4. After ignition of the carbonization equipment, the combustible gas is generated, remember to close the valve at the end of the carbonization equipment, so that the combustible gas can form an effective cycle.
5. When the charcoal furnace is draining moisture, open the air inlet holes before and after, and remember to close the draining holes after draining moisture.
6. Before the carbonization finishes, it is forbidden to open the main furnace to prevent the material from spontaneous combustion when it meets the air. 

Our technicians remind you again.

1. Take care when operating the carbonization equipment. 

2. Observe the temperature change of the carbonization equipment frequently, only when the temperature is suitable, can we produce high quality charcoal.